New

• Added validation to file transfer page to prevent users from inputting improper server URL information
• Added new log on disk to report GPS location of poor 4G connection when 4G is enabled
• Added ability to update Stop-Arm Camera V2 within a Ranger firmware update
• Added support for the “$” symbol in Wi-Fi Client password
• Added support for GPS location and SIM reporting to firmware site

Changed

• Changed “auto_upgrade” folder on disk to clear out firmware file after update unless the files ends with “_multi.tgz”
• Changed firmware upload button in web interface clears firmware from “auto_upgrade” folder on disk
• Reduced data usage of live view services
• Improved readability of DVR system log
• Improved accuracy of device health by reducing number of events uploaded during engine cranking with low battery

Fixed

• Fixed GPS log file size issue

Automated: Over the Air (OTA) via internet connection

1. When the DVR powers on it will connect to the internet.
2. Once connected, the DVR will report the serial number and current firmware version to the firmware site
3. If a new version is available, the version information and download link will be sent to the DVR
4. After the firmware downloads, the DVR will automatically update the next time the DVR boots up

Manual Update Methods

Method 1: through web interface

1. Download the firmware from the link at the top of the page to your device
2. Connect your device to the DVR unit’s Wi-Fi or LAN port

Method 2: through a SD card (preferred)

1. Plug a SD card into the proper card slot on your PC
2. Create a new folder named auto_upgrade in the root directory of the SD card
3. Download the firmware from the link at the top of the page to the "auto_upgrade" folder on the SD card
4. Insert the SD card into the DVR and power on the DVR. The DVR will boot and being applying the update. It will beep twice to indicate the start of the firmware update, then beep once a few min later signaling the end of the firmware update. Do not power off the DVR until the single beep is heard. The DVR will reboot on its own once the firmware update has been installed.