DR-200 Drive Recorder Firmware Version 4.8.26

Release Date 11/24/2022

How do I know which model I have?

  • The model number on the rear of unit is DR-200
  • The serial number on the rear of the unit contains xxxxS2DRAxxxx
  • The unit does NOT have a MicroUSB service port under the mount.
  • The model number and serial number may be found in the web page of the unit
Drive Recorder
What's New
  • Improved recovery logic to detect when an SD card is not mounted at bootup and recover after 60s instead of 15min
  • Fixed issue when powering off in the light and powering on in the dark not switching to night vision mode

Update Instructions

Method 1: through web interface

  1. Download the firmware from the link at the top of the page to your device (smart phone, tablet, or laptop)
  2. Connect your device to the DVR unit’s Wi-Fi or LAN port
  3. Open a web browser on your device and navigate to
  4. On the DVR’s web interface navigate to Settings > System Info
  5. Enter your username/password for access (Default Username: admin / Default Password: doesitall)
  6. In the Update Firmware box at the bottom of the page press Choose File and browse to the downloaded firmware file on your device
  7. Press Upload to upload the firmware to the DVR unit and update the firmware
  8. The unit will beep twice when the firmware has been uploaded and begins applying to the DVR
  9. After the firmware update completes it will beep once as well as display the status on screen; the DVR will then reboot automatically.

Method 2: through a SD card

  1. Plug a SD card into the proper card slot on your PC
  2. Create a new folder named auto_upgrade in the root directory of the SD card
  3. Download the firmware from the link at the top of the page to the "auto_upgrade" folder
  4. Eject the SD card from PC
  5. a. If DVR is off with the SD card plugged in, firmware update will start automatically once the DVR powers on
  6. b. If DVR is already on, firmware update will start automatically once the card is plugged in
  7. Plug the SD card into the DVR that needs to be updated
  8. After the firmware update completes it will display the status and if successful it will reboot the DVR unit

  • If you were connected to the DVR through Wi-Fi, you may need to reconnect after the DVR unit reboots.
  • After you have update the firmware it may be necessary to clear your browsers cache to allow it to load the updated interface, on Windows computers press CTRL + F5, on Mac computers hold Shift while clicking refresh on the page, and on smart phones you must go to Settings > History > Clear Browsing Data and select the web page.
  • All firmware releases after January 2018 contain an important security update as well as the additional login prompt used in step 5 above.
View Other Releases