New

• Added 4G support
• Added error handling for file transfer
• Added Wi-Fi AP match with Unit ID feature
• Added Wi-Fi Client WPA2 Enterprise Support
• Added globe icon in nav bar to show network connection

Changed

• Updated default settings
• Updated branding logo and colors
• Improved transfer setup process
• Updated help content
• Changed GPS Baudrate display to avoid confusion
• Removed "Advanced Settings" of cameras as it can't be used on any of the current camera models.
• Changed default security mode of Wi-Fi AP to WPA2 AES

Fixed

• Stop Arm Camera working as 9/10 instead of 7/8 on some pages
• Improved Wi-Fi Connectivity
• Fixed Remote Activation

Automated: Over the Air (OTA) via internet connection

1. When the DVR powers on it will connect to the internet.
2. Once connected, the DVR will report the serial number and current firmware version to the firmware site
3. If a new version is available, the version information and download link will be sent to the DVR
4. After the firmware downloads, the DVR will automatically update the next time the DVR boots up

Manual Update Methods

Method 1: through web interface

1. Download the firmware from the link at the top of the page to your device (smart phone, tablet, or laptop)
2. Connect your device to the DVR unit’s Wi-Fi or LAN port
3. Open a web browser on your device and navigate to 192.168.10.254 (LAN) or 192.168.1.254 (Wi-Fi)
4. On the DVR’s web interface navigate to Settings > System Info
5. Enter your username/password for access (Default Username: admin / Default Password: doesitall)
6. In the Update Firmware box at the bottom of the page press Choose File and browse to the downloaded firmware file on your device
7. Press Upload to upload the firmware to the DVR unit and update the firmware
8. The unit will beep twice when the firmware has been uploaded and begins applying to the DVR. Do NOT power off the DVR during this time!
9. After the firmware update completes it will beep once as well as display the status on screen; the DVR will then reboot automatically.

Method 2: through SD Card (preferred)

1. Insert an SD card into the card slot on your PC
2. If necessary, create a new folder named auto_upgrade in the root directory of the SD card
3. Download the firmware from the link at the top of the page to the "auto_upgrade" folder on the SD card
4. Insert the SD card into the DVR and power on the DVR. After the DVR boots, the unit will beep twice when the firmware upgrade begins. Do NOT power off the DVR during this time!
5. After the firmware update completes, the DVR will beep once, then reboot automatically with the new firmware.